CAD折弯标注尺寸怎么标注？折弯标注命令【DJO】

大家在CAD画图时，我们所画的CAD构件弧形太大了，普通的标准看起来很不美观，也不显眼，在图纸模型上上标注半径时尺寸线很长，今天给大家推荐CAD折弯标注命令DJO。

CAD折弯标注尺寸

CAD折弯标注尺寸【DIMJOGGED】，快捷命令【DJO】我们使用时输入DJO即可~

CAD折弯标注尺寸：DIMJOGGED
快捷命令：DJO

操作教程：

1.打开CAD软件并加载我们要标注折弯构件的图纸。

2.我们使用CAD折弯标注尺寸的几种方式

3.我们找到我们进行折弯标注的CAD图形，然后点击折弯命令or输入折弯快捷命令【DJO】。然后点击弧线，这时候提示我们点击图示中心位置。

4.点击中心位置后，指定尺寸线位置。鼠标点击合适的位置确定尺寸线。

5.接着我们点击标注的折弯位置，指定折弯位置，鼠标点击即可定位，折弯部分在哪里就点击哪里即可。

英文介绍：

When we draw in CAD, the arc of the CAD component we draw is too large, the ordinary standard looks very ugly, and it is not obvious, the size line is very long when the radius is marked on the drawing model, and today I recommend the CAD bending label command DJO.
CAD bending mark size [DIMJOGGED], shortcut command [DJO] we use when entering DJO can ~
Operation tutorial:
1. Open the CAD software and load the drawing that we want to mark the bending component.
2. We use CAD bending to mark dimensions in several ways
3. We find the CAD graphics that we have marked with bending, and then click the bending command or input the bending shortcut command [DJO]. Then click on the arc, prompting us to click on the center of the icon.
4. Click the center position and specify the size line position. Mouse click the appropriate position to determine the size line.
5. Then we click the marked bending position, specify the bending position, the mouse click can be positioned, where the bending part can be clicked.

恭喜你！你已经学会了CAD折弯标注尺寸怎么标注,若有其他问题可在下方留言哦~